***This model will fit the newer, smaller 1/4" sized RAM-LOK
This texture is a mild texture that will be a great alternative to a "smooth" texture so that you can be a smooth OG operator!
These MM1 textured aluminum scales are designed exclusively for the Microtech Standard Issue Gen2/v2 (MSI) to feature that knife's best assets!!
This option is going to be most like stock and comes standard in Right-Handed Carry, with jimping that follows the backspacer, and WITHOUT a lanyard hole.
But of course, we allow you to stray far from standard so you can add additional finger-jimping to the finger profile, change that pocket clip location, and make it more like stock by adding a lanyard hole if you prefer that style of carry!
Want to add some color to your carry, see our full-color gallery here for inspiration.
***VIEW CUSTOM MODIFICATION & CERAKOTING PROCESSING TIMES HERE.
Another Amazing Addition (AAA) - our new motto...as we have once again created a brand new GOAT for the Cold Steel AD-10 - with new finishes, new textures, and a completely linerless option in BOTH aluminum and titanium!
These scales have that OG feel you know and love, with a contour to fit your hand just right, and with those OG textures, you will surely find that perfect grip for your carry!
Introducing our newest finish option - our STONED aluminum finish.
We added a step to our process to give those aluminum scales that amazing feel, and we fell in love with the look...so for those looking for something a little more in between the natural shiny, scratchable aluminum and our In The Buff finish, then this might be your perfect option!
We're only offering two options for this model...standard - which includes the OEM style jimping, or smooth - which provides a smooth profile with no jimping.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Does your Deka nip your palms, or do you prefer a lanyard option?? Then be sure to check out our XL Deka V2 aluminum scales, which add 3/16" to the end of those scales and give you an ample opening for your favorite lanyard.
Prefer a "skinner" profile option, then check out our SKNY Hogue Deka V2 aluminum scales, which remove that finger choil and give your fingers freedom of placement.
***Compatible ONLY with Demko AD20.5 grivory models, THESE WILL NOT FIT THE BIG PIVOT MODEL
What's the perfect matching piece for your new set of OG scales...an OG Custom Back Spacer.
With 3 different custom designs, these backspacers will complete your customized look.
***This model will fit the newer, smaller 1/4" sized RAM-LOK
A step up to MM2 will give you deeper grooves for more grip, but a similar pattern to our MM1 texture.
These MM2 textured aluminum scales are designed exclusively for the Microtech Standard Issue Gen2/v2 (MSI) to feature that knife's best assets!!
This option is going to be most like stock and comes standard in Right-Handed Carry, with jimping that follows the backspacer, and WITHOUT a lanyard hole.
But of course, we allow you to stray far from standard so you can add additional finger-jimping to the finger profile, change that pocket clip location, and make it more like stock by adding a lanyard hole if you prefer that style of carry!
Want to add some color to your carry, see our full-color gallery here for inspiration.
***VIEW CUSTOM MODIFICATION & CERAKOTING PROCESSING TIMES HERE.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Does your Deka nip your palms, or do you prefer a lanyard option?? Then be sure to check out our XL Deka V2 aluminum scales, which add 3/16" to the end of those scales and give you an ample opening for your favorite lanyard.
Prefer a "skinner" profile option, then check out our SKNY Hogue Deka V2 aluminum scales, which remove that finger choil and give your fingers freedom of placement.
***THESE FIT THE SMALL PIVOT MODEL DEMKO AD20.5***
Look at those Scales...Thicker is Better!!
The Demko AD20.5 OEM Grivory scales measure around 0.120" in thickness, and these beauties, will thicken those scales out to 0.175" and keep those pins hidden!
Perfectly lining up those scales with those studs, and giving you more handle to get that job done with more comfort and balance.
***Longer Pocketclip screws provided with each set***
This option fits the LINERED SMALL PIVOT Models Only
Thicker and with a nice curved belly, these PHAT GOAT+ are improved to accommodate this "little" Shark Cub, the baby shark to the Demko AD20.5. But as usual, those PHAT+ GOAT scales will thicken your build to 0.175" and will keep those pins hidden for a beautiful surface!
**Scroll through photos to see the Large Pivot Model shown for texture reference as these new options get that photoshoot.
***See below for the full details on those raw aluminum finishes (product shown in our "shiny" STONED finish), or add some color to your carry with one of our many Cerakote ceramic coating options. See Additional processing times here for those coatings.
***This model will fit the newer, smaller 1/4" sized RAM-LOK
Our OG1 texture is our signature texture that gives a great amount of grip, but is not overly aggressive, just like every good OG!!
These OG1 textured aluminum scales are designed exclusively for the Microtech Standard Issue Gen2/v2 (MSI) to feature that knife's best assets!!
This option is going to be most like stock and comes standard in Right-Handed Carry, with jimping that follows the backspacer, and WITHOUT a lanyard hole.
But of course, we allow you to stray far from standard so you can add additional finger-jimping to the finger profile, change that pocket clip location, and make it more like stock by adding a lanyard hole if you prefer that style of carry!
***VIEW CUSTOM MODIFICATION PROCESSING TIMES HERE.
*The pocket clip has been changed to a threaded option, new pictures will be coming soon (see Stoned version for most recent updates)
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Does your Deka nip your palms, or do you prefer a lanyard option?? Then be sure to check out our XL Deka V2 aluminum scales, which add 3/16" to the end of those scales and give you an ample opening for your favorite lanyard.
Prefer a "skinner" profile option, then check out our SKNY Hogue Deka V2 aluminum scales, which remove that finger choil and give your fingers freedom of placement.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Does your Deka nip your palms, or do you prefer a lanyard option?? Then be sure to check out our XL Deka V2 aluminum scales, which add 3/16" to the end of those scales and give you an ample opening for your favorite lanyard.
Prefer a "skinner" profile option, then check out our SKNY Hogue Deka V2 aluminum scales, which remove that finger choil and give your fingers freedom of placement.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Does your Deka nip your palms, or do you prefer a lanyard option?? Then be sure to check out our XL Deka V2 aluminum scales, which add 3/16" to the end of those scales and give you an ample opening for your favorite lanyard.
Prefer a stock profile option? Then check out our STOCKY Hogue Deka V2 aluminum scales, which remove that finger choil and give your fingers freedom of placement.
***These fit the Lightweight (LW) model with removable hardware. Have a riveted model? Be sure to check out our Manix 2 Aluminum & Titanium options.
If you can take your Lightweight Manix 2 apart with a screwdriver, then these GOATs will go right back on with that SAME screwdriver!!
These are featured in our linerless clamshell design featuring a built-in backspacer and an integral lanyard tube, now making this option one of the easiest Spyderco scale swaps on the market!
Our aluminum options will add about an ounce to that carry...but still keep it a light carry for your daily needs!
How is this model different from your Manix 2 LW - OG GOATShell (stock washer compatible) aluminum scales?
The number one feedback that we hear from this community is the sensitive nature of that build, and with a set of Skiff's Ceramic Bearings that knife runs as smooth as you have always dreamed of for those newer torx secured Manix 2 LW models (have a riveted/pinned Manix 2 LW...then be sure to check out our Spyderco Manix 2 / Manix 2 LW Skiff Conversion Kit. Due to the custom milling required to run those Skiffs, these will also upgrade that stock pivot to a Titanium pivot, allowing you to change its color and add a little "bling" to your build!
Have a three-screw pocket clip? Be sure to add that upgraded milling option to support your favorite clip!
All Original GOAT products are 100% USA-made from design to manufacturing, all done in our shop in Tallahassee, FL.
***This model will fit the newer, smaller 1/4" sized RAM-LOK
A step up to MM2 will give you deeper grooves for more grip, but a similar pattern to our MM1 texture.
These MM2 textured aluminum scales are designed exclusively for the Microtech Standard Issue Gen2/v2 (MSI) to feature that knife's best assets!!
This option is going to be most like stock and comes standard in Right-Handed Carry, with jimping that follows the backspacer, and WITHOUT a lanyard hole.
But of course, we allow you to stray far from standard so you can add additional finger-jimping to the finger profile, change that pocket clip location, and make it more like stock by adding a lanyard hole if you prefer that style of carry!
***SEE CUSTOM MODIFICATION PROCESSING TIMES HERE.
**The photo shown is standard configuration - right-handed, w/o finger jimping, with no lanyard hole and is shown in our In the Buff finish.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Does your Deka nip your palms, or do you prefer a lanyard option?? Then be sure to check out our XL Deka V2 aluminum scales, which add 3/16" to the end of those scales and give you an ample opening for your favorite lanyard.
Prefer a stock profile option? Then check out our STOCKY Hogue Deka V2 aluminum scales, which remove that finger choil and give your fingers freedom of placement.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Does your Deka nip your palms, or do you prefer a lanyard option?? Then be sure to check out our XL Deka V2 aluminum scales, which add 3/16" to the end of those scales and give you an ample opening for your favorite lanyard.
Prefer a "skinner" profile option, then check out our SKNY Hogue Deka V2 aluminum scales, which remove that finger choil and give your fingers freedom of placement.
***THESE FIT THE SMALL PIVOT MODEL DEMKO AD20.5***
Our "stocky" GOATs are designed to give you that stock-like feel but with all the OG upgrades! These are sure to bring texture and style to your front pocket!
These GOATs are going to be slightly thicker than your standard Demko AD20.5 OEM Grivory thickness which measures around 0.120" and these GOATs will be around 0.135"...just enough to make those scales match that pivot surface for a smooth transition from pivot to scale!
***Optional longer pocket clip screws are provided for use with aftermarket clips***
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
XL (extended) - with 3/16" additional length, this option provides a great option for those lanyard lovers, but also gives a better feel in hand and no more knife bites in your palm!
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Prefer a stock profile? Then be sure to check out our STOCKY Hogue Deka V2 Aluminum Scales.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Does your Deka nip your palms, or do you prefer a lanyard option?? Then be sure to check out our XL Deka V2 aluminum scales, which add 3/16" to the end of those scales and give you an ample opening for your favorite lanyard.
Prefer a stock profile option? Then check out our STOCKY Hogue Deka V2 aluminum scales, which remove that finger choil and give your fingers freedom of placement.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
XL (extended) - with 3/16" additional length, this option provides a great option for those lanyard lovers, but also gives a better feel in hand and no more knife bites in your palm!
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Prefer a "skinny" profile? Then be sure to check out our SKNY Hogue Deka V2 Aluminum Scales. Those options have the fingerchoil removed provinding full finger freedom.
***This model will fit the newer, smaller 1/4" sized RAM-LOK
This texture is a mild texture that will be a great alternative to a "smooth" texture so that you can be a smooth OG operator!
These MM1 textured aluminum scales are designed exclusively for the Microtech Standard Issue Gen2/v2 (MSI) to feature that knife's best assets!!
This option is going to be most like stock and comes standard in Right-Handed Carry, with jimping that follows the backspacer, and WITHOUT a lanyard hole.
But of course, we allow you to stray far from standard so you can add additional finger-jimping to the finger profile, change that pocket clip location, and make it more like stock by adding a lanyard hole if you prefer that style of carry!
***SEE CUSTOM MODIFICATION PROCESSING TIMES HERE.
**The photo shown is standard configuration - right-handed, w/o finger jimping, with no lanyard hole and is shown in our In the Buff finish.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
XL (extended) - with 3/16" additional length, this option provides a great option for those lanyard lovers, but also gives a better feel in hand and no more knife bites in your palm!
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Prefer a "skinny" profile? Then be sure to check out our SKNY Hogue Deka V2 Aluminum Scales. Those options have the fingerchoil removed provinding full finger freedom.
***This model will fit the newer, smaller 1/4" sized RAM-LOK
Our OG1 texture is our signature texture with great grip while still not being "aggressive" making that carry not only look like an OG but feel like one too!
STOCKY is our "stock" option and comes standard with a Right-Handed Pocket Clip (more pocket clip options coming soon), no finger-jimping...and keeping it sleek with NO lanyard hole to interrupt that fine texture!
But of course, we allow you to stray far from stock...so you can make your GOAT an Original GOAT by adding additional modifications (*please note custom modifications do require more processing time - see our order status page for more details):
add finger-jimping to the belly
add a lanyard hole
Made from high-quality USA-made 6061 aluminum these options will take that everyday carry to the OG level!
Available in all of our standard aluminum finishes...Stoned, In the Buff, or add some color to your carry with one of our custom Cerakoting coating options (additional processing time required)!
Nitro-V blade owners, check your liners. If you can see them from the outside, then your option is compatible; if the liner is NOT visible, then it has the smaller recessed liner and will not be compatible (see photos for more information)
Make that Kizer Drop Bear a GOAT with a set of our custom aluminum scales. These scales are designed to improve ergonomics by providing a bit of curvature and, of course, those gorgeous OG textures to keep a good grip on that carry!
Keeping these lightweight and an easy swap, our GOAT SKINS are our thinnest scale options available, allowing you to get that OG look and feel while keeping that favorite lightweight in the pocket!
Standard configuration is Right-Handed with NO LANYARD hole, but as always, we welcome you to make that GOAT your own by adding those additional customizations!
Prefer to add some weight to that carry and upgrade it to a titanium GOAT, then visit our GOAT SKINS - Titanium Scales for the Kizer Drop Bear to find your new favorite OG!
Don't settle for generic aluminum edc, instead upgrade to an aluminum OG and change your daily carry forever! Upgrade even further with custom options - custom designs to custom colors, transform your front-pocket to an OG today!
