BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
XL (extended) - with 3/16" additional length, this option provides a great option for those lanyard lovers, but also gives a better feel in hand and no more knife bites in your palm!
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Prefer a "skinny" profile? Then be sure to check out our SKNY Hogue Deka V2 Aluminum Scales. Those options have the fingerchoil removed provinding full finger freedom.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
XL (extended) - with 3/16" additional length, this option provides a great option for those lanyard lovers, but also gives a better feel in hand and no more knife bites in your palm!
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Prefer a "skinny" profile? Then be sure to check out our SKNY Hogue Deka V2 Aluminum Scales. Those options have the fingerchoil removed provinding full finger freedom.
***This version fits the smaller 1/4" ram lock
Our Drift texture is a mixed texture with a smooth backbone, but those evident drift marks from your friendly OG!!
These Drift textured aluminum scales are designed exclusively for the Microtech Standard Issue Gen2/v2 (MSI) to feature that knife's best assets!!
This option is going to be most like stock and comes standard in Right-Handed Carry, with jimping that follows the backspacer, and WITHOUT a lanyard hole.
But of course, we allow you to stray far from standard so you can add additional finger-jimping to the finger profile, change that pocket clip location, and make it more like stock by adding a lanyard hole if you prefer that style of carry!
***SEE CUSTOM MODIFICATION & CERAKOTING PROCESSING TIMES HERE.
**The photo is shown in right-handed carry, with the additional finger jimping, and with no lanyard hole. This is shown in our In the Buff finish
**Right and Left handed configurations include our exclusive right or left handed LNW/OG pocket clip (and no holes on the show side), and the No Clip option does not include the clip and will have NO pocket clip holes included in your scales! Scales and custom pocket clip will be cerakoted same color.
These scales for the Spyderco YoJimbo 2 have been specially designed by Original GOAT to provide a better feel in your hand with its well rounded surface, slightly longer profile, and custom pocket clip configuration, these scales are sure to make this your favorite carry!
Currently only offered in a ceramic-coated aluminum or titanium and in our Ridgeline texture, which is slightly modified version of our MM1 texture.
***Looking to make it a custom GOAT, be sure to check out custom color selections found here...we added a preview of one of our most popular premium cerakote color options - Midnight Bronze (H-294)
***This model will fit the newer, smaller 1/4" sized RAM-LOK
As a perfect complement to the MSI, the Stitch becomes the next option in the Microtech family to become OG compatible!
This texture is a mild texture that will be a great alternative to a "smooth" texture so that you can be a smooth OG operator!
STOCKY is our "stock" option and comes standard with a Right-Handed Pocket Clip (more pocket clip options coming soon), no finger-jimping...and keeping it sleek with NO lanyard hole to interrupt that fine texture!
But of course, we allow you to stray far from stock...so you can make your GOAT an Original GOAT by adding additional modifications (*please note custom modifications do require more processing time - see our order status page for more details):
add finger-jimping to the belly
add a lanyard hole
Made from high-quality USA-made 6061 aluminum these options will take that everyday carry to the OG level!
Available in all of our standard aluminum finishes...Stoned, In the Buff, or add some color to your carry with one of our custom Cerakoting coating options (additional processing time required)!
Regardless of whether your BIG PIVOT Demko Shark Cub® has liners or not, the OG has you covered with our PHAT GOAT+ options!
Thicker and with a nice curved belly, these PHAT GOAT+ scales are improved to accommodate this "little" Shark Cub, the baby shark to the Demko AD20.5. But as usual, those PHAT GOAT scales will thicken your build to 0.175," and show off that beautiful custom-milled surface, hiding those pins and keeping that surface nice and clean!
***See below for the full details on those raw aluminum finishes (product shown in our "shiny" STONED finish), or take that GOAT up a level with one of our many custom coating options (2-8 weeks of ADDITIONAL processing time may be required)!
Looking for Titanium options? Check out our Demko Shark Cub® - Titanium selection.
Have a Small Pivot - Demko Shark Cub®-GRN model? We have you covered with our Small Pivot Aluminum options.
***This model will fit the newer, smaller 1/4" sized RAM-LOK
Another blended texture, our Wings texture takes our MM1 texture and provides a double-cut against the "grain" to give you a great grip with those "wings" on those GOATs!
STOCKY is our "stock" option and comes standard with a Right-Handed Pocket Clip (more pocket clip options coming soon), no finger-jimping...and keeping it sleek with NO lanyard hole to interrupt that fine texture!
But of course, we allow you to stray far from stock...so you can make your GOAT an Original GOAT by adding additional modifications (*please note custom modifications do require more processing time - see our order status page for more details):
add finger-jimping to the belly
add a lanyard hole
Made from high-quality USA-made 6061 aluminum these options will take that everyday carry to the OG level!
Available in all of our standard aluminum finishes...Stoned, In the Buff, or add some color to your carry with one of our custom Cerakoting coating options (additional processing time required)!
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
XL (extended) - with 3/16" additional length, this option provides a great option for those lanyard lovers, but also gives a better feel in hand and no more knife bites in your palm!
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Prefer a "skinny" profile? Then be sure to check out our SKNY Hogue Deka V2 Aluminum Scales. Those options have the fingerchoil removed provinding full finger freedom.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
XL (extended) - with 3/16" additional length, this option provides a great option for those lanyard lovers, but also gives a better feel in hand and no more knife bites in your palm!
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Prefer a stock profile? Then be sure to check out our STOCKY Hogue Deka V2 Aluminum Scales.
***This model will fit the newer, smaller 1/4" sized RAM-LOK
Our Drift texture is a little bit smooth...with that distinct flat backbone...but with plenty of grip with its curved ridges along those edges!
STOCKY is our "stock" option and comes standard with a Right-Handed Pocket Clip (more pocket clip options coming soon), no finger-jimping...and keeping it sleek with NO lanyard hole to interrupt that fine texture!
But of course, we allow you to stray far from stock...so you can make your GOAT an Original GOAT by adding additional modifications (*please note custom modifications do require more processing time - see our order status page for more details):
add finger-jimping to the belly
add a lanyard hole
Made from high-quality USA-made 6061 aluminum these options will take that everyday carry to the OG level!
Available in all of our standard aluminum finishes...Stoned, In the Buff, or add some color to your carry with one of our custom Cerakoting coating options (additional processing time required)!
***MSI is shown for texture reference as we get these new GOATs to their photoshoot
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
XL (extended) - with 3/16" additional length, this option provides a great option for those lanyard lovers, but also gives a better feel in hand and no more knife bites in your palm!
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Prefer a stock profile? Then be sure to check out our STOCKY Hogue Deka V2 Aluminum Scales.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
XL (extended) - with 3/16" additional length, this option provides a great option for those lanyard lovers, but also gives a better feel in hand and no more knife bites in your palm!
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Prefer a "skinny" profile? Then be sure to check out our SKNY Hogue Deka V2 Aluminum Scales. Those options have the fingerchoil removed provinding full finger freedom.
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Does your Deka nip your palms, or do you prefer a lanyard option?? Then be sure to check out our XL Deka V2 aluminum scales, which add 3/16" to the end of those scales and give you an ample opening for your favorite lanyard.
Prefer a "skinner" profile option, then check out our SKNY Hogue Deka V2 aluminum scales, which remove that finger choil and give your fingers freedom of placement.
Nitro-V blade owners, check your liners. If you can see them from the outside, then your option is compatible; if the liner is NOT visible, then it has the smaller recessed liner and will not be compatible (see photos for more information)
Make that Kizer Drop Bear a GOAT with a set of our custom aluminum scales. These scales are designed to improve ergonomics by providing a bit of curvature and, of course, those gorgeous OG textures to keep a good grip on that carry!
Keeping these lightweight and an easy swap, our GOAT SKINS are our thinnest scale options available, allowing you to get that OG look and feel while keeping that favorite lightweight in the pocket!
Standard configuration is Right-Handed with NO LANYARD hole, but as always, we welcome you to make that GOAT your own by adding those additional customizations!
Prefer to add some weight to that carry and upgrade it to a titanium GOAT, then visit our GOAT SKINS - Titanium Scales for the Kizer Drop Bear to find your new favorite OG!
***This model will fit the newer, smaller 1/4" sized RAM-LOK
Our newest texture to the OG lineup, the Sonic texture, gives you some grip and a cool look with those concentric rings.
STOCKY is our "stock" option and comes standard with a Right-Handed Pocket Clip (more pocket clip options coming soon), no finger-jimping...and keeping it sleek with NO lanyard hole to interrupt that fine texture!
But of course, we allow you to stray far from stock...so you can make your GOAT an Original GOAT by adding additional modifications (*please note custom modifications do require more processing time - see our order status page for more details):
add finger-jimping to the belly
add a lanyard hole
Made from high-quality USA-made 6061 aluminum these options will take that everyday carry to the OG level!
Available in all of our standard aluminum finishes...Stoned, In the Buff, or add some color to your carry with one of our custom Cerakoting coating options (additional processing time required)!
**Right and Left handed configurations include our exclusive right or left handed LNW/OG pocket clip (and no holes on the show side), and the No Clip option does not include the clip and will have NO pocket clip holes included in your scales! Scales and custom pocket clip will be cerakoted same color.
These scales for the Spyderco YoJimbo 2 have been specially designed by Original GOAT to provide a better feel in your hand with its well rounded surface, slightly longer profile, and custom pocket clip configuration, these scales are sure to make this your favorite carry!
Currently only offered in our standard ceramic-coated aluminum or titanium and in our Ridgeline texture, which is slightly modified version of our MM1 texture.
Nitro-V blade owners, check your liners. If you can see them from the outside, then your option is compatible; if the liner is NOT visible, then it has the smaller recessed liner and will not be compatible (see photos for more information)
Make that Kizer Drop Bear a GOAT with a set of our custom aluminum scales. These scales are designed to improve ergonomics by providing a bit of curvature and, of course, those gorgeous OG textures to keep a good grip on that carry!
Keeping these lightweight and an easy swap, our GOAT SKINS are our thinnest scale options available, allowing you to get that OG look and feel while keeping that favorite lightweight in the pocket!
Standard configuration is Right-Handed with NO LANYARD hole, but as always, we welcome you to make that GOAT your own by adding those additional customizations!
Prefer to add some weight to that carry and upgrade it to a titanium GOAT, then visit our GOAT SKINS - Titanium Scales for the Kizer Drop Bear to find your new favorite OG!
BEING DISCONTINUED - FINAL SALE!
***Compatible with the Hogue Deka v2 (this model DOES NOT have the two screws in the middle of the grip, BUT this version DOES include the MAGNACUT option)
Not just replacement scales, with a few subtle improvements over those stock scales, these are sure to take your carry to the next level.
XL (extended) - with 3/16" additional length, this option provides a great option for those lanyard lovers, but also gives a better feel in hand and no more knife bites in your palm!
Finger Jimping - based on customer feedback, we have added some grooves to the top of the profile to give your carry a better forward grip when needed!
Prefer a "skinny" profile? Then be sure to check out our SKNY Hogue Deka V2 Aluminum Scales. Those options have the fingerchoil removed provinding full finger freedom.
Nitro-V blade owners, check your liners. If you can see them from the outside, then your option is compatible; if the liner is NOT visible, then it has the smaller recessed liner and will not be compatible (see photos for more information)
Make that Kizer Drop Bear a GOAT with a set of our custom aluminum scales. These scales are designed to improve ergonomics by providing a bit of curvature and, of course, those gorgeous OG textures to keep a good grip on that carry!
Keeping these lightweight and an easy swap, our GOAT SKINS are our thinnest scale options available, allowing you to get that OG look and feel while keeping that favorite lightweight in the pocket!
Standard configuration is Right-Handed with NO LANYARD hole, but as always, we welcome you to make that GOAT your own by adding those additional customizations!
Prefer to add some weight to that carry and upgrade it to a titanium GOAT, then visit our GOAT SKINS - Titanium Scales for the Kizer Drop Bear to find your new favorite OG!
The SKNY GOAT Manix 2 Aluminum Conversion Kit is built for those who prefer a sleeker, “bellyless” grip without sacrificing strength or style. Designed and manufactured in Tallahassee, FL, this kit gives your Spyderco Manix 2 a fully custom upgrade with precision-machined aluminum scales and titanium hardware—all 100% USA-made.
Compatible With Every Manix 2
Our unique three-piece design lets you convert any Spyderco Manix 2—including pinned/riveted LW models—into a smooth-running Skiff bearing OG. Already running aftermarket ball-cages? No problem. Everything is designed to fit seamlessly. (If you’ve got a torx-screw Manix 2 LW, check out our GOATSHELL options.)
What’s Included in the SKNY GOAT Kit
1 set of Original GOAT linerless aluminum scales (SKNY profile)
1 titanium backspacer of your choice — enables the installation of any Manix 2 or Manix 2 LW blade
1 set of titanium pivots
1 barrel bushing (to pair with pivots)
1 complete set of titanium hardware
And of course, a set of Skiff ceramic bearings & hardened washers
Choose Your Look & Feel: Texture Information - AXIS
***New Texture - if our OG1 and Expanded had a love child - this new texture sits cleanly between the light bite of an OG1 and the aggressive traction of Expanded - final photo coming soon
Grip Level: Medium
Look & Feel: Symmetrical, balanced crosscuts that create a refined yet tactile surface. Feels centered and controlled in hand.
Best For: Users who want a versatile, all-purpose grip that's secure without being too aggressive - ideal for everyday carry across all environments.
Make It Yours: Finishes & Coatings
Take your Manix 2 from subtle to standout with our cerakote and custom finish options. Choose from clean single-color finishes, explore our wide range of custom colorways, or go bold with Splatter and Fade designs. Each finish is crafted to elevate both look and feel. Please be sure to view the Order Status page for additional processing times for these services.
100% USA Made
Every Original GOAT product is proudly designed and manufactured in Tallahassee, Florida. From concept to machining, this kit is built start to finish in the USA.
Nitro-V blade owners, check your liners. If you can see them from the outside, then your option is compatible; if the liner is NOT visible, then it has the smaller recessed liner and will not be compatible (see photos for more information)
Make that Kizer Drop Bear a GOAT with a set of our custom aluminum scales. These scales are designed to improve ergonomics by providing a bit of curvature and, of course, those gorgeous OG textures to keep a good grip on that carry!
Keeping these lightweight and an easy swap, our GOAT SKINS are our thinnest scale options available, allowing you to get that OG look and feel while keeping that favorite lightweight in the pocket!
Standard configuration is Right-Handed with NO LANYARD hole, but as always, we welcome you to make that GOAT your own by adding those additional customizations!
Prefer to add some weight to that carry and upgrade it to a titanium GOAT, then visit our GOAT SKINS - Titanium Scales for the Kizer Drop Bear to find your new favorite OG!
The STOCKY GOAT Manix 2 Conversion Kit brings your favorite Spyderco Manix 2 back to its roots with that stock-like profile and feel (except those exceptional curves)—rebuilt with Original GOAT precision. Designed for knife enthusiasts who prefer the original belly of the Manix 2, this kit delivers durability, performance, and full customization options in true OG style.
Compatible With Every Manix 2
Our unique three-piece design lets you convert any Spyderco Manix 2—including pinned/riveted LW models—into a smooth-running Skiff bearing OG. Already running aftermarket ball-cages? No problem. Everything is designed to fit seamlessly. (If you’ve got a torx-screw Manix 2 LW, check out our GOATSHELL options.)
What’s Included in the STOCKY GOAT Kit
1 set of Original GOAT linerless aluminum scales (STOCKY profile)
1 titanium backspacer of your choice — enables the installation of any Manix 2 or Manix 2 LW blade
1 set of titanium pivots
1 barrel bushing (to pair with pivots)
1 complete set of titanium hardware
And of course, a set of Skiff ceramic bearings & hardened washers
Choose Your Look & Feel: Texture Information - AXIS
***New Texture - if our OG1 and Expanded had a love child - this new texture sits cleanly between the light bite of an OG1 and the aggressive traction of Expanded - final photo coming soon
Grip Level: Medium
Look & Feel: Symmetrical, balanced crosscuts that create a refined yet tactile surface. Feels centered and controlled in hand.
Best For: Users who want a versatile, all-purpose grip that's secure without being too aggressive - ideal for everyday carry across all environments.
Make It Yours: Finishes & Coatings
Take your Manix 2 from subtle to standout with our cerakote and custom finish options. Choose from clean single-color finishes, explore our wide range of custom colorways, or go bold with Splatter and Fade designs. Each finish is crafted to elevate both look and feel. Please be sure to view the Order Status page for additional processing times for these services.
100% USA Made
Every Original GOAT product is proudly designed and manufactured in Tallahassee, Florida. From concept to machining, this kit is built start to finish in the USA.
Don't settle for generic aluminum edc, instead upgrade to an aluminum OG and change your daily carry forever! Upgrade even further with custom options - custom designs to custom colors, transform your front-pocket to an OG today!
