Weight Reduction Option (textures may vary just slightly): Heavyweight (No Weight Reduction): scales set weight - approx. 4.3 ounces Lightweight (Full Weight Reduction +$25): scale set weight - approx. 3.2 ounces Texture Information: Smooth - Grippiness Scale 0/10 Smooth is just as it sounds; this is basically a non-textured item with a very smooth surface. This is the texture for those who love that smooth Ti look, and don't care about additional grip and texture. Be sure to check out our additional customization options for this particular texture! Finish Information: Our standard titanium finishes are available: STONED, BLASTED (If individual photos are not available for those finishes, see below for our comparison photo) What's included: Set of Original GOAT Titanium Lightweight Linerless scales for the Demko AD20/AD20S/AD20i Full OG conversion hardware pack, no need to beat those OEM pins out of your liners - keeping that stock hardware pristine - preserving your stock value! Should you need it - FREE installation and/or fitment check - please email us, we will get you taken care of! Installation: Easy-Moderate - 10-15 minute install. Uses OEM screws and pivot; all other hardware has been provided by Original GOAT, keeping your OEM pins and liners clean and undamaged! Also, allows you to swap back to stock at any time! Optional Add-ons: Skiff Ceramic Bearings (AD20 / AD20S) Backspacers & Pocket Clips Make sure to watch our installation video for all the tips on getting that new GOAT running in the wild.
$235.00 - $280.00
Love that blade and lock of your Demko AD20/AD20S, but always wished that you handle the handle feel of the AD10, well, we have merged the best of both worlds with this complete conversion kit. The Hybrid SS Demko AD20/AD20S Conversion Kit brings everything you love about that Demko knife (blade shapes/steels and that Sharklock) and merges it with the more substantial handles found on the Cold Steel AD-10 to provide you with the best of both worlds! Compatible With Every AD20/AD20S/AD20I Our unique three-piece design lets you convert any Demko AD20/AD20S/AD20I into a more robust Hybrid SS. If you prefer that standard handle profile, be sure to check out our standard Demko AD20 Items. What’s Included in the STOCKY GOAT Kit 1 set of Original GOAT Hybrid SS linerless titanium scales 1 titanium backspacer of your choice 1 titanium pivot (or Timascus pivot with upgrade) 1 SS barrel bushing & SS Stud(to pair with pivots Choose Your Look & Feel: Texture Information - SMOOTH (Cold Steel AD-10 scales shown for texture reference) Grip Level: Low Look & Feel: Clean, flat anodized or raw finish Best For: Minimalists & pocket comfort Titanium Finishes for Every Style Explore Original GOAT titanium in PHRESH, STONED, and BLASTED raw finishes, vibrant single-color anodization, and custom laser & anodization options through Way of Knife and EDC Gear House. Ceramic coatings add durability and style—giving your gear endless customization possibilities. Please be sure to view the Order Status page for additional processing times for these services. 100% USA Made Every Original GOAT product is proudly designed and manufactured in Tallahassee, Florida. From concept to machining, this kit is built start to finish in the USA.
$285.00 - $315.00
***ALWAYS CHECK FOR PROPER CLEARANCE ON INSTALL, BUT HAVE BEEN REDESIGNED TO ACCOMMODATE NEWER, LONGER BLADES*** Complete that titanium build with an OG titanium backspacer. Make it a matching set, or change things up to give a little finish contrast! Finish Information: PHRESH- Fresh from OG production, unfinished, and ready for your pocket or the perfect foundation for any DIY anodization project. This shiny metal finish will be the finish you seek if you want to match that OEM textured titanium finish. Stoned - Stonewashed for that "typical" titanium finish (photos still coming). A lighter finish than our previous stonewash, this stoned finish is sure to please those looking for that perfect in-between of our PHRESH and blasted finishes. Blasted - A dark matte finish, we take this finish one step further to help prevent fingerprints; however, you are still likely to leave your OG imprint on this option! And of course, if you would like to add some color to that spacer, be sure to check out our full line of cerakoting services and anodization services under that Custom finish (be sure to check Order Status page for processing times)!
$50.00 - $75.00
***Compatible ONLY with BIG PIVOT Demko AD20.5 models, THESE WILL NOT FIT THE SMALL PIVOT MODEL FINALLY...backspacers for the BIG PIVOT Demko AD20.5, this does include the full titanium version of the AD20.5. Available in a smooth style or our standard jimped option, and available in our standard titanium finishes. PHRESH- Fresh from OG production, unfinished, and ready for your pocket or the perfect foundation for any DIY anodization project. This shiny metal finish will be the finish you seek if you want to match that OEM textured titanium finish. Stoned - Stonewashed for that "typical" titanium finish. This stoned finish is sure to please those looking for that perfect in-between of our PHRESH and blasted finishes. Blasted - A dark matte finish (shown in the photo) If you are looking to add a little color to your titanium, be sure to check out all of our custom cerakoting options that we have available, and if available, our anodization options under that PHRESH or BLASTED finish.
$50.00 - $65.00
These linerless titanium scales will take that Cold Steel AD-10 or AD-10 Lite and elevate it to an OG...and this is our ONLY smooth texture option in titanium...so if that is your feel, these are for you! Offered in full weight or our milled-out lightweight option, there is a weight option for you regardless of how you like your titanium. Check out our aluminum scale options if you want an even lighter option! Two profile options for this model...standard - the OEM jimping style, or smooth - a smooth profile with no jimping. ***Due to the curvature of this option, WOK Custom Laser/Ano work may look different from examples provided. Photo shown in our Stoned Finish.
$225.00 - $250.00
***Will fit Cold Steel AD-10 model; we are unsure about those custom Demko AD-10 creations. Until we receive one of those models, or confirm that in the wild, we CANNOT guarantee these will fit that option. The Cold Steel AD-10 Titanium Pocket Clip offers five distinct textures—Smooth, Gunstock, MM2, Sharktooth, and OG1—each precisely crafted to complement the milling patterns of our AD-10 custom scales. Built from durable titanium, these clips enhance both grip and style while providing secure, reliable pocket retention tailored to match your knife’s aesthetic and function. Titanium Finishes for Every Style Explore Original GOAT titanium in PHRESH, STONED, and BLASTED raw finishes, vibrant single-color anodization, and custom laser & anodization options through Way of Knife and EDC Gear House. Ceramic coatings add durability and style—giving your gear endless customization possibilities.Please be sure to view the Order Status page for additional processing times for these services. ***PHRESH FINISH IS NOT AVAILABLE FOR SMOOTH, if chosen, you will be contacted to select an alternative finish or confirm that you want to refinish this item yourself and sign-off on the PHRESH finish! 100% USA Made Every Original GOAT product is proudly designed and manufactured in Tallahassee, Florida. From concept to machining, this kit is built start to finish in the USA.
$65.00 - $80.00
***This model will fit the newer, smaller 1/4" sized RAM-LOK As a perfect complement to the MSI, the Stitch becomes the next option in the Microtech family to become OG compatible! Now that we have Way of Knife/EDC Gear House working with us, we are bringing Smooth Titanium Scales to every platform we can, as their work is absolute genius. Be sure to check out their craftsmanship on IG @wayofknifemi! STOCKY is our "stock" option and comes standard with a Right-Handed Pocket Clip, no finger-jimping...and keeping it sleek with NO lanyard hole to interrupt that smooth canvas! (***need a left-handed set, contact us to see what we can make happen) But of course, we allow you to stray far from stock...so you can make your GOAT an Original GOAT by adding additional modifications (*please note custom modifications do require more processing time - see our order status page for more details): add finger-jimping to the belly add a lanyard hole Whether you prefer your titanium PHRESH/shiny or Blasted/matte, we have the perfect finish available for your GOAT (see below for photos of those different finishes). You can add some color to those options with our premium anodization service, WOK Custom service (due to the curvature of this option, WOK Custom Lasering may look a little different than other models), or have that set custom-coated to match your OG vibe! ***SEE CUSTOM MODIFICATION & CERAKOTING PROCESSING TIMES HERE. ***Photo Shown is in Blasted - Steel Blue
$300.00 - $315.00
***This model will fit the newer, smaller 1/4" sized RAM-LOK As a perfect complement to the MSI, the Stitch becomes the next option in the Microtech family to become OG compatible! Now that we have Way of Knife/EDC Gear House working with us, we are bringing Smooth Titanium Scales to every platform we can, as their work is absolute genius. Be sure to check out their craftsmanship on IG @wayofknifemi! STOCKY is our "stock" option and comes standard with a Right-Handed Pocket Clip, no finger-jimping...and keeping it sleek with NO lanyard hole to interrupt that smooth canvas! (***need a left-handed set, contact us to see what we can make happen) But of course, we allow you to stray far from stock...so you can make your GOAT an Original GOAT by adding additional modifications (*please note custom modifications do require more processing time - see our order status page for more details): add finger-jimping to the belly add a lanyard hole Whether you prefer your titanium PHRESH/shiny or Blasted/matte, we have the perfect finish available for your GOAT (see below for photos of those different finishes). You can add some color to those options with our premium anodization service, WOK Custom service (due to the curvature of this option, WOK Custom Lasering may look a little different than other models), or have that set custom-coated to match your OG vibe! ***SEE CUSTOM MODIFICATION & CERAKOTING PROCESSING TIMES HERE. ***Photo Shown is in Blasted - Steel Blue
$275.00 - $290.00
***Compatible ONLY with Demko AD20.5 grivory models, THESE WILL NOT FIT THE BIG PIVOT MODEL ATTENTION: August 29th, OUR CURRENT JIMPED OPTION HAS BEEN REPLACED WITH OUR NEW JIMPED OPTION GOING FORWARD...new photos will be coming! What completes the OG transformation...a matching titanium backspacer to go with our OG Titanium Scales...of course!! Available in our three (3) popular styles: Smooth, Ball-Groove, and Jimped, and in three (3) OG finishes: PHRESH- Fresh from OG production, unfinished, and ready for your pocket or the perfect foundation for any DIY anodization project. This shiny metal finish will be the finish you seek if you want to match that OEM textured titanium finish. Stoned - Stonewashed for that "typical" titanium finish. This stoned finish is sure to please those looking for that perfect in-between of our PHRESH and blasted finishes. Blasted - A dark matte finish (shown in the photo) If you are looking to add a little color to your titanium, be sure to check out all of our custom cerakoting options that we have available.
$45.00 - $65.00
***ALWAYS CHECK FOR PROPER CLEARANCE ON INSTALL, BUT HAVE BEEN REDESIGNED TO ACCOMMODATE NEWER, LONGER BLADES*** Complete that titanium build with an OG titanium backspacer. Make it a matching set, or change things up to give a little finish contrast! Finish Information: PHRESH- Fresh from OG production, unfinished, and ready for your pocket or the perfect foundation for any DIY anodization project. This shiny metal finish will be the finish you seek if you want to match that OEM textured titanium finish. Stoned - Stonewashed for that "typical" titanium finish (photos still coming). A lighter finish than our previous stonewash, this stoned finish is sure to please those looking for that perfect in-between of our PHRESH and blasted finishes. Blasted - A dark matte finish, we take this finish one step further to help prevent fingerprints; however, you are still likely to leave your OG imprint on this option! And of course, if you would like to add some color to that spacer, be sure to check out our full line of cerakoting services and anodization services under that Custom finish (be sure to check Order Status page for processing times)!
$50.00 - $75.00
***This model will fit the newer, smaller 1/4" sized RAM-LOK Now that we are collaborating with Way of Knife/EDC Gear House, we are bringing a smooth titanium option to EVERY platform we can, as their work is absolutely stunning, and be sure to check out their amazing laser/ano work on IG @wayofknifemi! These Smooth titanium scales are designed exclusively for the Microtech Standard Issue Gen2/v2 (MSI) to feature that knife's best assets!! Our "standard" option is going to come in Right-Handed Carry, with jimping that follows the backspacer (not on the finger profile, but can be added), and WITHOUT a lanyard hole. But of course, we allow you to stray far from standard so you can add additional finger-jimping to the finger profile, change the pocket clip location, and make it more like stock by adding a lanyard hole if you prefer that style of carry! Want to add some color to your carry? See our full-color gallery here for inspiration. ***SEE CUSTOM MODIFICATION & CERAKOTING PROCESSING TIMES HERE. ***This new design is in prototyping, but we have included a customized Stitch photo for an idea of what that smooth surface will look like!
$235.00 - $250.00
***This model will fit the newer, smaller 1/4" sized RAM-LOK Now that we are collaborating with Way of Knife/EDC Gear House, we are bringing a smooth titanium option to EVERY platform we can, as their work is absolutely stunning, and be sure to check out their amazing laser/ano work on IG @wayofknifemi! These Smooth titanium scales are designed exclusively for the Microtech Standard Issue Gen2/v2 (MSI) to feature that knife's best assets!! Our "standard" option is going to come in Right-Handed Carry, with jimping that follows the backspacer (not on the finger profile, but can be added), and WITHOUT a lanyard hole. But of course, we allow you to stray far from standard so you can add additional finger-jimping to the finger profile, change the pocket clip location, and make it more like stock by adding a lanyard hole if you prefer that style of carry! Want to add some color to your carry? See our full-color gallery here for inspiration. ***SEE CUSTOM MODIFICATION & CERAKOTING PROCESSING TIMES HERE. ***This new design is in prototyping, but we have included a customized Stitch photo for an idea of what that smooth surface will look like!
$260.00 - $275.00
***Compatible ONLY with BIG PIVOT Demko AD20.5 models, THESE WILL NOT FIT THE SMALL PIVOT MODEL FINALLY...backspacers for the BIG PIVOT Demko AD20.5, this does include the full titanium version of the AD20.5. Available in a smooth style or our standard jimped option, and available in our standard titanium finishes. PHRESH- Fresh from OG production, unfinished, and ready for your pocket or the perfect foundation for any DIY anodization project. This shiny metal finish will be the finish you seek if you want to match that OEM textured titanium finish. Stoned - Stonewashed for that "typical" titanium finish. This stoned finish is sure to please those looking for that perfect in-between of our PHRESH and blasted finishes. Blasted - A dark matte finish (shown in the photo)
$50.00 - $65.00
Our community has practically begged us to bring Smooth Titanium GOATs to our lineup, and so they have arrived!
The addition of Way of Knife / EDC Gear House as an OG Partner didn't hurt these GOATs' growing popularity!
Currently providing smooth knife scales, backspacers, and pocket clips...
...but want to see more...shoot us a message of what you would like to see be the next GOAT on this page!
