TRIBE FAVORITES
$32.00 - $48.00
$32.00 - $40.00
$80.00 - $104.00
$96.00 - $112.00
$152.00 - $184.00
OG Orders - Status Updates
As we continue to improve our communication efforts, we hope this is a great way to keep all of our customers informed on the CURRENT status of their pending order, as we are always working very hard to get you those GOATs as quickly as we can, but we are still a rather small operation with big dreams...so we greatly appreciate everyone's patience as we create that perfect OG designed exclusively for your pocket!!
CLICK TO JUMP TO ORDER UPDATES
***THINGS TO REMEMBER WITH YOUR OG ORDER***
Your order confirmation email (please check your spam folder if you don't have that email) should include either an estimated shipping date (for our pre-order items) or a production estimate time (for our standard production items) for a "standard" item...unless you found a rare GOAT that's on-hand...these will not have this estimation and instead those should ship within 1-4+ weeks ***depending on final finish selected - as coatings WILL ADD processing time to that GOAT...see below for details!!
You will see this estimated information listed under the label "Pre-order info:"
This is the estimate at the time of your order (if you make changes or add custom options, it can extend this estimation).
Our "standard" option will usually be either a fully ambidextrous option (no clip location on product - AD20,AD20.5, AD10...), or is a right-handed configuration (AD15, Deka, Manix, MSI...). AND we have moved to a "NO HOLE" approach with our GOATs as we know so many prefer to keep those beautiful textures uninterupted, so if that product has a lanyard option, then the standard option WILL NOT have a lanyard hole included!
For our aluminum options, our STONED finish will be the quickest option, with our In the Buff finish being just a few additional processing days for that set to be processed in finishing; however, coated GOATs will add significant time to your order, please see below.
Beyond that...you are creating a semi-custom to a full custom GOAT...or what we like to call an ORIGINAL GOAT...and will require a little bit more time to be created...so here are some examples...these things happen in production, which may give you a "discount" in that total time and if you have chosen multiple upgrades, you should default to the upgrade with the longest processing time...we will provide some additional examples below:
- Left, Both and No Pocket Clip Configurations = 4-8+ weeks
- Finger Jimping Addition = 1-2+ weeks
- Stock Clip vs Non-Stock Clip = 2-3+ weeks
- Lanyard Hole Modifications (Adding) = 2-3+ weeks
- Lightweight Milling - 1-2+ weeks
General RAW Finishes (see anodization and coating processing times below):
Aluminum
- STONED (SHINY) - Fastest processing time - 0-3 business days
- IN THE BUFF (MATTE) - 1-5 business days
Titanium
- PHRESH - Fastest processing time - 0-3 business days
- STONED - Longest processing time - 1-3 weeks
- BLASTED - Middle processing time - 1-10 business days
ALL Coating/Anodization Services -
- Coatings - Single Colors:
- Standard colors - 2-3+ weeks
- OG Colors - 3-4+ weeks (especially our signature OG Orange)
- Premium Colors - 3-4+ weeks
- Custom Colors - 4-8+ weeks
- Premium services
- Coatings - (Splatter/Fade GOATs) - 3-4+ weeks
- Anodization - 4-8+ weeks
***Orders with full custom colors, please add an add an ADDITIONAL 2-3 weeks as those coatings have to be shipped in from supplier before coating services can begin and that will lead to additional time.
***EXAMPLES (Both Handed Configurations are our longest wait time)***
MSI - comes standard Right Handed, No Finger Jimping, and No Lanyard Hole
- MSI - No Pocket, No Finger Jimping, and No Lanyard Hole = + 4-8 weeks
- MSI - Right Handed, Finger Jimping, and No Lanyard Hole = + 1-2 weeks
- MSI - Right Handed, Finger Jimping and ADD a Lanyard Hole = + 2-3 weeks
- MSI - Both Handed, Finger Jimping and ADD a Lanyard Hole = + 4-8 weeks
Manix Lightweight 2 - comes standard Right Handed, with Wire Clip Configuration
- Manix LW 2 - Right Handed, Three Screw option - + 2-3 weeks
- Manix LW 2 - Left Handed, Wire Clip Configuration - + 4-8 weeks
- Manix LW 2 - Left Handed, Three Screw Configuration - + 4-8 weeks
See Status Updates Below for ANY delays or known issues with your favorite OGs!!
LOOKUP YOUR SPECIFIC ORDER DETAILS
(new functionality - please be sure to scroll down for any specific delays or information possibly related to the item you have on order)
KNOWN DELAYS/ISSUES
December 9, 2024
STANDARD PRODUCTION
(YOUR ORDER HAS AN ESTIMATED PROCESSING TIME)
Delayed 2-3 weeks depending on model and option
If you have a semi-custom/custom item on order it could be up to an additional 4 to 8 weeks, but we are working hard to get every order processed as quickly as possible!
PRE-ORDERS
(YOUR ORDER HAS AN ESTIMATED SHIPPING DATE)
MICROTECH MSI
V2 OPTIONS
DESIGN CHANGE!!!
We have one (1) October 24th coated order, that didn't pass its final QC check, and so unfortunately had to make another pass through its steps, but should be out this week!
Most remaining orders in the November 14th are in progress, as they were custom orders; and ALL non-coated standard items should be shipped by the end of this week, and we are working to get the remainder shipped as soon as those become OGs!
***December 12th batch, will be delayed, as these will be entering production after our current November 14th Stitch batch (as all Microtech items are run in the same machine). Please be sure to continue to track your order through our new tracking service above!
LIMITED EDITION - V1 MODELS
Titanium - We are going to be reaching out to each of you that remain on this special list, as we still continue to receive feedback, and customers seem to still be confused as to the model that they have in hand. So, before we finally put these very special custom items into production, we want to make sure that you do indeed have a compatible model! So, be on the lookout for an email coming this week to make sure that these custom GOATs are exactly what you need!
***Titanium Delay - November 14th
Unfortunately, our latest batch of titanium was not only two weeks late due to the hurricanes that FL had in Sept/October, but it has been transforming much more in production than usual, as a result the time required for hand-fitment and fine-tuning as been quite long, once again resulting in a delay of these items, and we do again apologize, but are working hard to have this be our last late delivery of these custom options as we do have two brand-new machines inbound from California that will be dedicated to our titanium production to allow both our titanium and aluminum production to get back on track!
Demko AD20 Ti
Show Gunstocks/November 14th (First Batch - June order date) - All Procesed (if you have a second batch item too, we may be holding that first order so that ALL your GOATs can make it home for Christmas)!
November 14th (Second Batch - August order date) - most of these items are now through production and are in fitment to get fine tuned and hand-fitted to make sure those are the OGs you expect! We are working to have all PHRESH items shipped by the end of this week, and if your GOAT behaves we will be working to have STONED and BLASTED items out as well by the end of this week. If you have a coated item, those may not ship until next week, so again please let us know if this GOAT needs to be home for Christmas and we will do what we are able!
AD10, AD15, AD20.5 & Engage Ti
AD15 - Two (2) new Gunstock items are still processing (one is being stoned and the other requested custom coating) but should be out by the end of this week!
AD20.5 - In Production - standard PHRESH options should begin shipping by the end of this week again followed by Blasted, Stoned and Coated options! Newly designed Gunstocks will ship last out of this batch!
AD10/Engage - Backordered - we will continue to provide updates regarding these orders but these items are definitely giving our fitment team some troubles so we appreciate your patience as we get these GOATs wrangled in and on their way as the OGs you expect!
SHARK CUB - Aluminum
Due to the storms backing up our general production a bit in October again, those items are slightly delayed on the November 14th batch, but these items have begun to ship and most STONED items are already on their way, with just a few OG1s to be caught up, and the remainder are those custom left-handed options (please remember those do take 4-8 weeks additional time to process) and coated GOATs!
Stitch - Aluminum
First batch Stitches are all out in the wild, and we received a bit of feedback regarding the pocket clip configurations on those different options, we are making a change to remove the need for that pocket clip nut (as the stock aluminum Stitch scales do not come with that hardware) across our full Microtech platform and this will also make that pocket clip installation for all of those options!
These items are backed up as we had a machine failure last week that is in the process of being fixed, but this fix, unfortunately, requires a HAAS technician, and their first availability is when our new machines arrive...so we greatly appreciate your patience as we work to get this machine back online asap! We will continue to provide updates as we are updated!
This issues affected November 14th and December 12th Batches!
CIVIVI - Vision FG
December 12th batch, we are expecting to have those items in a machine this week with our Gunstock options being first to head out into the wild, followed by those subsequent textures. Again with this being a titanium item, we are will see how quickly these little skins make it through fitment! We will continue to keep everyone posted as those items make their way through their stations!
